Ethiopia Standard Speed Limiter For Limiting Car Truck Speed To 30KM/H with Printer

1. Speed Limiter GPS System Start up

Put the SIM card in place and installed the tracker in the speed limiter, the red indicator is on. About 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals, and the red indicator will keep flashing every 2 seconds when the GSM module is no communication. When the blue indicator is light, the unit has been located.

2. Speed Limiter GPS System Main functions

• ​Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself.
• Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed unit will send out alarm to the authorized numbers.
• Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and anytime.
• Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter.
• Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.
• Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.
• Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it breaches the district.
• Restart the unit: send SMS to resume the default of unit.
• Auto Track: You can set up auto track by SMS or on-line positioning platform.
• Mileage statistics; ACC checking; cutting off power and alarm.

3 Product Specifications

4. Speed Limiter Requirement

Ethiopia Standard Speed Limiter For Limiting Car Truck Speed To 30KM/H with Printer

1. For the purpose of anti-tampering of the setting of the "set speed" of a speed limiter device, the connection points on a speed limiter device for adjustment of "set speed" shall be properly sealed and protected from unauthorized adjustment.
2. The speed limiter function or road speed limiter shall be EMCcompatible or shall have Anti-Jammer mechanism
3. The speed limiter function or the speed limiter device shall allow normal accelerator control for the purpose of gear changing
4. The speed limiting function shall be performed progressively in such a mariner that excessive juddering or discomfort is not caused.
5. The speed limiter function or the road speed limiter shall not cause uncontrolled engine power
6. The speed limiter function shall be independent of the condition or soundness of the speedometer

7 Speed Limiter TESTS:

• The speed limiter device should be approved as a device alone when it meets the requirements of clause 8.3 and 8.4.When it is intended for a specific vehicle model, it should meet the requirements of clause 8.6.
• Five samples of speed limiter device shall be provided - four samples for the performance and endurance test described in clause 8.3 and 8.4 and one sample as fitted on the vehicle for carrying out.the tests prescribed in clause 8.5. In the case of
  add-on or on-board system built in the vehicle, the involved system and its components should be provided separately for the performance and endurance tests.
• The speed limiter shall be visually examined for workmanship, finish, marking and general requirements mentioned in clause 4 pertaining to the components alone
• The speed limiter shall be connected to the rated voltage. The speed limiter device shall be coupled to a suitable test rig and tested for its function viz. limiting the speed at the set value. The maximum current consumption is noted. The maximum current of each type of speed limiter device shall not exceed the values specified by the manufacturer.

shenzhen CarTracker Technology Co., Ltd was founded in 2009,it is one of the most professional manufacturers for gps tracker and mobile DVR product.Our company is located in Shenzhen city,Guangdong province,China.At present our GPS Tracker products are mainly exported to Southeast Asia,Africa,South America,The Middle East ,Europe and so on.

Our main products are Car GPS Tracker,Personal GPS Tracker,large battery GPS Tracker and 3G mobile DVR.Every year we develop new products to meet customer requirements.and they are certified by CE,ROHS,FCC and 3C certification bodies.

We have a Research and Development team of more than twenty engineers. Most of them have a master's degree and 12 engineers have more than 8 years work experience in the GPS Industry.we also have a group of professional sales and after sales team. they will provide after-sales and pre-sales technical support for you.

Our factory is located in Cuishan industrial area,we have about 2000 square meters of building area and more 200 production staff.they are mainly responsible for gps product production,testing and quality control.our monthly output is more 20000pieces.the factory has passed ISO9001,ISO14000 Certification.

Welcome to visit our factory and we look forward to the opportunity to cooperate.