Real-Time Positioning Car Gps Tracker With Cheap Cost Free App
Main components: (V1.0)
GPS functions:
protocol: GT06 1)support ACC ignition checking ,
G-sensor : BS250E 2)support Relay for cutting off power/fuel
input power: 9-100V 3)built-in GPS antenna: 18*18*4 mm
power IC: SL3036H 4)built-in battery, Real time tracking.
GSM module: MT6261 5)Geo-fence, over speed alarm, GPS module: Ublox
6) platform /APP supported
GPS Tracker Parameters:
| Working Voltage: | DC9-100V or 12-40V, optional. |
| GSM Chip: | MT6261 |
| GPS Chip: | AT6558R |
| MPS | 9486 |
| Working temperature: | ‘-20 ℃ to +70 ℃ |
| Storage temperature: | ’-40 ℃ to +80 ℃ |
| Working Humidity: | 5% to 90% |
| Power consumption: | Average power consumption<1W, power-saving status<2mW |
| GPS Tracker size: | 76mm*27mm*15mm |
| Packing size: | 80mm*125mm*40mm |
| Interface: | Power input, ACC input detection, cut off fuel circuit. |
| Communication band: | GSM/GPRS 850MHz 900MHz 1800MHz 1900MHz |
| Weight: |
38g |
Multi-Mode Positioning: BD GPS LBS
Key Features:
-Change Password
-Authorization
-Single Locating
-Auto track continuously
-GPS drift suppression
-Absolute street address by SMS
-Location-based service (LBS)
-Forward the third parties’ message
-Charges Inquiry
-Alarm Function
-Low battery alarm
-External Power off the alarm (Suitable for B, C, and D model)
-GPS blind Spot alert
-SOS
-Geo-fence
-Multi-area management
-Movement alarm
-Over speed alarm
-ACC working alarm (Option, for model B, C, D)
-Fuel alarm (Option, for model C, D)
-Cut off the Oil and Power System (Option, for model C, D)
-Function of Remote Controller (Option, for model D ONLY)
-Arm
-Silent Mode
-DISARM
-Alarms under Arm State
-Door alarm (Option for model C and D)
-ACC alarm (Optional for model B, C, D )
-Shock Sensor alarm
-Check the Vehicle State
-Reset Hardware
-Check IMEI
-Set up Terminal (local) Time
-TCP / UDP Switch
-Configure parameters by USB
-GPRS setting
-Setting up APN
-GPRS User ID and password Setup
-IP and port setup
-Less GPRS traffic
-Modes Switch between “SMS” and “GPRS”
-Set up monitor center number.
Device status indicators
4.1 Connect DC 9-100V power supply and the red LED will light
continuously.
The red LED is the power signal,
it is always on when the external DC is connected.
4.2 The blue LED is the GSM signal indicator.
It is always on when there is no GSM;
it flashes when GSM is normal;
it flashes quickly when transmitting data.
4.3 The yellow LED is the GPS signal indicator:
it is always on when there is no positioning;
it flashes after positioning.
Real-Time Positioning Car Gps Tracker With Cheap Cost Free App
GPS Tracker Applications And Where you install it.
GPS Tracker Main Functions:
1. Real-Time Positioning:
TK003 GPS Tracker Device will get the real-time position message
and upload all status to the server system.
And will display the position on the map. you can click any of the
points to know the name. locating time. and acc status. speed
GPS Time, direction, and so on.
2. Vibration alarm:
After setting the command of vibration by SMS. When it moves there
will be a vibration alarm message.
3. Power-off alarm:
If the power supply of GPS Tracker is cut off or GPS Tracker will
send the alarm message to the server or bonded Phone number.
4. Remote Car Lock
If an illegal ignition alarm receives from GPS Tracker, you can
remotely cut off the vehicle circuit, so that to avoid being driven
away.
5. SOS Alarm
Users can press the SOS button on GPS Tracker in emergency
situations. GPS Tracker will send an alarm message to manage the
system and
Call police simultaneously.
Terminal connection:
male switch, Female switch
Red(positive) Black (Negative)
1. red wire connect positive(+),black wire connect negative(-)
2. power input connector to power positive and negative connectors(
make sure to connect the right connector)
set server IP or Domain name
1. Set server Domain name: SERVER,1, domain name, port,0#
2. Set Server IP:
SERVER,0,IP, Port,0#
The last bit 0 stands for TCP
Real-Time Positioning Car Gps Tracker With Cheap Cost Free App
FAQ:
Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral brown cartons. If you
have a legally registered patent,
we can pack the goods in your branded boxes after getting your
authorization letters.
Q2. What are your terms of payment?
A: T/T, Western Union, Alipay, Or Paypal(Samples). We'll show you
the photos of the products and packages.
Q3. What are your terms of delivery?
A: EXW, FOB.
Q4. How about your delivery time?
A: Generally, it will take 1-3 days after receiving your advance
payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce your samples. we can't provide free samples
Q6. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery
What is your cell phone number?
My mobile phone number / WhatsApp is +8618673367060.
