GPS Vehicle Tracker With Vibration Alarm,Remote Cut Engine Free
IOS/Android APP 4G GPS Tracker
C003-01-4G GPS Vehicle Tracker
C003-01 is a vehicle gps tracker with vibration alarm and can be
installed into cars,motorcycles,trucks,e-bikes.
It allows functions such as cut-off power/fuel,geo-fence,over-speed
warning,historical data record.
The unit can work well in extreme environments,with detailed
factory inspection.
GPS Vehicle Tracker With Vibration Alarm,Remote Cut Engine Free
IOS/Android APP 4G GPS Tracker
Description
| Dimension | 90 x 40 x 15 mm | Weight | 50 g |
| Power input | 9 - 90 VDC | Working current | 22 mA /12 mA |
| Humidity | 5%–95% | Temperature | -20°C to 70 °C |
| Battery | 200 mAh | GPS Chipset | MT6261 |
| Frequency | Quad band | Accuracy | 5 - 10 m |
| TTFF | Hot ≤ 2 sec | GPRS | Class 12 , TCP/IP |
| TTFF | Warm ≤ 32 sec | Acquisition Sensitivity | -144dBm |
| TTFF | Cold ≤ 38 sec | Tracking Sensitivity | -160dBm |
GPS Vehicle Tracker With Vibration Alarm,Remote Cut Engine Free
IOS/Android APP 4G GPS Tracker
10 Functions to protect the safety of your car
Accurate positioning
ACC detection
Smat APP
Historical trajectory
Geo-fence
Remote setting
Multiple modes
Over speed alarm
Built-in battery
Built-in GPS antenna
Accurate positioning
GPS+LBS+GPRS multi-mode calibration,the accuracy is up to 90%.
Support 180 days history
History route playback
History route palyback includes total mileage,driving speed,parking
details and flexible time period as selected.
Geo-fence
You can set up a virtual safety zone and if any device coordinates
go out or enter into this zone,an alert notification will be sent
to your APP.
GPS Vehicle Tracker With Vibration Alarm,Remote Cut Engine Free
IOS/Android APP 4G GPS Tracker
Solutions to common problems of GPS locator
(1) Question: What else should I prepare after I buy it? Can it be
used directly?
Answer: To prepare a mobile phone card, this card must be activated
with GRPS CMNET Internet access function.
(2) Q: Why is the newly installed equipment displayed in other
places?
Answer: 1. If the vehicle displays a "stationary" state on the
platform after being installed, but it is displayed elsewhere on
the map. This is because after the device is installed, the vehicle
has been at a standstill. When the device is at a standstill, GPS
data will not be transmitted to the server (for data saving
considerations). This phenomenon is because the device has not yet
transmitted the latest positioning data to the server, and the old
positioning data is still displayed. So what you see is the old
location data.
Solution: Please drive the vehicle out to an open area for a
certain distance. When the vehicle is in motion, the latest
positioning data will be uploaded to the server, and the accurate
location can be seen. .
2. If the vehicle displays "offline" or "not online" status on the
platform after it is installed. This is because the device has not
been connected to the server, the GPS positioning data has not been
uploaded to the server, and the old positioning data is seen.
Contactor Details:
whatsapp: +86-13717161241
mobilephone: +86-13717161241
Wechat:+86-13717161241
website:www.gpstrackerlocator.com
