Real Time Automobile Vehicle Location Tracker Devices With Black
Color Shell
V2C GPS Tracker Description:
V2C motorcycle GPS Tracker product is one new mini smart gps
product, the power input voltage is DC9V to 100V, so you can
install it to any vehicle. for example: truck, bus, taxi,
motorcycle and so on.
It supports 2G GSM sim card, you can track device via SMS message
command or GPRS. The position data is sent to server each 20
seconds. Of course the time interval can be changed by SMS command.
Functions:
| NO. | Feature | Descrption |
| 1 | GPS Positioning | Any time you can track the position via mobile phone or computer.
and the device always send the currrent position data to server. |
| 2 | Playback Routes | the device send current GPS position data to server each 20seconds.
then they will be in server for more than 2 months. user can check
the routes via history track function. |
| 3 | Setting Function Via SMS | Setting function of device via SMS and check location via SMS. |
| 4 | Ignition Detection | Green line can detect the voltage value of vehicle iginition line.
the status will be in the GPS data and stored in server. |
| 5 | Vibration Alarm | After setting,Device will send message and call user if theft shock
the car or drive the car away. |
| 6 | Overspeed Alarm | When speed is over than the set speed, device will send message to
user. |
| 7 | Shut Off Engine | When you want to stop the vehicle,you can send the SMS command then
the device will control the engine off via relay. |
| 8 | Built-in Antenna | Built-in high tech of GPS/GSM antenna for easy installation. |
Specifications:
Type: Car GPS Tracker Protocol: TCP IP
Shell: Black plastics Built-in Battery: Yes
Weight: 0.15kg Frequency: 850/900/1800/1900MHz
Accuracy: Less than 30meters SIM Card: 2G GSM
Antenna: Built-in Ignition detection: Support
Mileage statistics: Yes Power off alarm: Yes
Screen: No screen Warranty: 15months
Model name: V2C Brand name: CAX
Steps of installation:
1. Prepare one 2G GSM SIM Card and open GPRS function.
2. Open the back cover,insert a SIM card to SIM Card Slot.
3. Turn on the battery switch and three LED will be on.
3. Connect the power cable with the interface of device. Now theree
LED lights will lighting. Make sure the
receiving side face up, without any metal object shelter. The LED
lights will glashing after 1 to 5mins.
It shows working normally.
4. Close the back cover.
5. Please ask professional technical to connect wires and install
to the vehicle. After correct installation.
the REd LED will falshing, 1 min. Later the Blue Led will falshing
too. That shows installing completely.
V2C Product Picture:
